Agilent Technologies 93000 SOC Series Training Manual page 416

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Lesson 1 – Test Method Structure

For the primary analog set, you can change the set number or

parameter(s) of the primary analog set. The Setup APIs have the

following style:

•To change the primary analog set number to another number:

Analog.primary( INT no )

•To change conditions of the specified module in the primary analog set:

Analog.MDL(STRING pin). Function-1.Function-2 . . .Function-N

Digitizer/Sampler

DUT Pin, Aout

e.g. DC Offset to 0.5 V

Changing the Primary Analog Set

The following examples show how to change the primary analog

•Changing the current analog set number to "1":

Analog.primary(1);

•Changing the dc offset to 0.5 V for the AWG connected to Ain pin:

Analog.AWG("Ain").vOffset(0.5 V);

•Changing the dc offset to 0.5 V and voltage range to 5V for the

digitizer connected to Aout pin:

Analog.DGT("Aout").vOffset(0.5 V).vRange(5 V);

Examples of Changing the Primary Analog Set

You can also omit the specifier "Analog." in your program for ease of

programming such as "DGT("Aout").vOffset(0.5 V)".

But you cannot omit it in "Analog.primary()" statement only.

vOffset( 0.5 V )

Show Quick Links

Table of Contents