Reset Translation-Id; Reset Val - Avaya Definity SI Maintenance Manual

reset translation-id

reset translation-id
This command resets the translation-ID on the translation card(s) to match the
processor(s), saves translations to the memory card, and restores use of the add,
change, remove, and duplicate commands.
NOTE:
This command can be executed only by Avaya Services.
Action/Object Qualifier
reset
translation-id
Error message
In duplicated systems, the message,
Cannot reset translation-ID without standby SPE being
accessible
means that both processors must be sane and operational.
A standby SPE that has been busied out must be released (release
standby-spe).
Check that the SPE-select switches on the DUPINT circuit pack are in the
AUTO position.

reset val

This command performs the functions of the reset board command but overrides
querying the board to determine if an announcement autosave is in process. This
allows resetting the circuit pack if it is in the insane state.
reset val 1C07
Port Maintenance Name
01C07 VAL-BD
Screen 8-25. Reset VAL report
555-233-123
Qualifier Description Logins
Example: Avaya Services only
reset translation-id
TEST RESULTS
Alt. Name Test No. Result
53
Defaults
Error Code
PASS
Issue 4 May 2002
Feature
Interactions
See ''Error
message''
8-277