Avaya Definity SI Maintenance Manual page 467

list testcalls
Output
The following example is of the output for list testcalls detail grp 80.
list testcalls detail grp 80
Group: 80 Type: co
THRESHOLD VALUES
Marginal
Unacceptable
Trk Test Test Test -16dBm
Mem Date Time Rslt
1
2
3
4
5
6
7
8
9
Detail report field descriptions
Group
Type
Vendor
TTL Type
Threshold
Values
Trk Mem
Test Date
Test Time
Tst Rslt
1004Hz-loss
Min
1004Hz-loss
Max
555-233-123
ATMS MEASUREMENT REPORT
Vendor:
Loss dev at
1004Hz-loss 404Hz 2804Hz C-msg C-ntch SRL SRL
Min Max - + -
-2 21 9 9 9
-2 21 9 9 9
0dBm
NE FE NE FE NE FE NE FE
The trunk group number selected.
The trunk group type.
The vendor of this trunk group.
The kind of test line for this trunk group.
The list of marginal and unacceptable threshold values defined on the
trunk group form.
The following fields appear on the lower section of the form. Many of the
column headings contain the abbreviations "FE" for far end and "NE" for
near end. These abbreviations define which end took the measurements.
The trunk member within the trunk group.
The month and day this trunk was tested.
The time of day this trunk was tested.
This field describes the results of the trunk transmission test.
Far-to-near and near-to-far measurements of 1004-Hz loss from low-level
tone.
Far-to-near and near-to-far measurements of 1004-Hz loss at 0 dBm.
Page 1 SPE A
TTL Type: 105-w-rl
+ Noise Noise LO HI
9 55 74 0 0
9 55 74 0 0
NE FE NE FE NE FE NE FE
Issue 4 May 2002
ERL
0
0
NE FE
8-217