Model
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
Operating power considerations
When you connect the device to collocated equipment, ensure that enough optical attenuation exists
to avoid overloading the receivers of each device. You must consider the minimum attenuation
requirement based on the specifications of third-party equipment. For more information about
minimum insertion losses for Avaya optical products, see Installing Transceivers and Optical
Components on Avaya Ethernet Routing Switch 3600 Series.
Locating end of sale notices
Use the following procedure to locate the most up-to-date information on end of sale notices and
replacement recommendations for transceivers and optical components.
Procedure
1. Go to the Avaya Support website at http://support.avaya.com.
2. Select Support by Product > Documents.
3. Enter the product name, and a release.
4. Select Product Lifecycle Notices.
5. Click Enter.
6. Select the End of Sale notice to view the information.
Checking status LEDs to verify switch installation
Perform this procedure to verify the hardware installation and operation of the unit.
The status LEDs on the front of the unit indicate the installation and operational status of the
hardware.
January 2017
Description
SFP+ DAC 3 meter
SFP+ DAC 5 meter
Installing Avaya Ethernet Routing Switch 3600 Series
Comments on this document? infodev@avaya.com
Locating end of sale notices
Part number
AA1403019–E6
AA1403020–E6
29