Deleting Atm Links For Virtual Switch Ports; Managing Permanent Virtual Channels (Pvcs) - Avaya P550R User Manual

Deleting ATM Links for Virtual Switch Ports

Managing Permanent Virtual Channels (PVCs)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
To delete ATM Links:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 64).
2. Click the number of the switch port in the Switch Ports
column of the ATM Uplink module you want to delete ATM
links from. The Switch Ports dialog box opens
3. Click Manage Virtual Switch Ports. The Virtual Switch
Ports dialog box opens
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
4. Click Manage Links in the ATM Links column of the virtual
switch port link you want to delete. The ATM Link for Virtual
Switch Port <#> dialog box opens
5. Select the ATM Link in the Name column you want to
delete.
6. Click Delete. The Delete ATM Link dialog box opens.
* Note: To delete the ATM Link Admin Status, you must
disabled it.
7. Click Yes to delete the ATM Link, or No to restore the
previous settings.
In RFC1483, you manage the traffic on your ATM network with
Permanent Virtual Channels, similar to QoS in LANE. Under LANE,
you define a QoS Domain which contains QoS Sets (the Parameters
for each VC) that a LEC should use when creating a VC. Under
RFC1483, you define the PVC in advance and as such, configure the
parameters when you configure the PVC.
To manage PVCs:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 64).
Configuring RFC 1483
(Figure 66).
(Figure 78).
(Figure 65).
4-23