show ip ospf virtual-links
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
User.
Displays parameters that explain the current state of OSPF virtual links.
show ip ospf virtual-links
The following command displays parameters about the current state of the
virtual links to the switch.
(configure)# show ip ospf virtual-link
Virtual link to router 43.0.0.0 is up
Transit area 1.0.0.0 via interface, Cost of using 1
Transit Delay is 1 seconds
Timer Intervals Configured:
Hello 10
Dead 40
wait 40
Retransmit 5
Transit 1
P550R, P580, P880, and P882.
OSPF
19-35