Ip Address Information Configuration; Connecting A Console - Avaya Ethernet Routing Switch 3600 Series Manual

Installing ERS 3600 in an equipment rack
Label
Rx

IP address information configuration

The following sections contain information necessary to configure IP address parameters on the
switch.

Connecting a console

Before you begin
• Terminal with AC power cord and keyboard
• Serial cable — a DB-9 to RJ-45 adapter or other suitable console cables can be used – the
maximum length of a console cable is 25 feet (8.3 meters)
Procedure
1. Connect one end of serial cable to the DB—9 connector on the terminal.
2. Connect the other end of the serial cable to the RJ–45 connector on the switch.
3. Turn the terminal on.
January 2017
Color/Status
Solid Amber
Amber / blinking
Green / slow blinking
Off
Solid Green
Green / blinking
Solid Amber
Amber / blinking
Green / slow blinking
Installing Avaya Ethernet Routing Switch 3600 Series
Comments on this document? infodev@avaya.com
Description
SFP detected and Link
established.
SFP link established and
transmit activity detected.
RX & TX blinking together in a
slow pattern indicate that the
port has been disabled by the
software.
No link established.
SFP+ detected and link
established.
SFP+ link established and
receive activity detected.
SFP detected and link
established.
SFP link established and
receive activity detected.
RX & TX blinking together in a
slow pattern indicate that the
port has been disabled by the
software.
32