Displaying Eap-Neap Clients On A Port; Displaying Eapol Port Information; Changing Eap Settings - Avaya 5000 Series Troubleshooting Manual

Displaying EAP-NEAP clients on a port

About this task
Display EAP-NEAP clients on the port.
Procedure
1. Use the show mac-address-table command to display the clients on the
2. Review the command output for anomalies.

Displaying EAPOL port information

About this task
Display EAPOL port information.
Procedure
1. Use the show eapol port command to display EAPOL information for a port or
2. Observe the command output for discrepancies or errors.

Changing EAP settings

About this task
This section provides troubleshooting guidelines for changing the EAP settings to clean up old
MACs.
Procedure
1. Use the eap-force-unauthorised command to set the administrative state of
2. Use the eapol status auto command to change to eap-auto to start.
Troubleshooting
This is a consolidated log message reference document and provides additional
information about log messages for your product.
port.
ports.
the port to forced unauthorized.
EAP-NEAP unexpected port shutdown
December 2013 133