Displaying Short-Lived Ip Protocol Filters - Avaya P550R User Manual Addendum

User Guide Addendum for the Avaya P550R and P880, v5.3.2
Command
Examples

Displaying Short-Lived IP Protocol Filters

Command
Example
4
For information about the FIRE and FORE paths, see "Routing
Overview" in Chapter 1, "Introduction," of the Avaya P550R, P580,
P880, and P882 Multiservice Switch User Guide, Version 5.3.1.
To disable the filter for a short-lived IP protocol, enter Global
Configuration mode and use the following command:
no ip short-lived {tcp | udp} <port>
Table 2. Keywords, Arguments, and Options
Keyword, Argument,
or Option
{tcp | udp}
<port>
To disable the short-lived IP protocol filter for DNS, enter the
following command:
no ip short-lived udp 53
To disable the short-lived IP protocol filter for NTP, enter the
following command:
no ip short-lived udp 123
To display the short-lived IP protocol filters that are currently
enabled, enter Global Configuration mode and use the following
command:
show ip short-lived
After you enter the show ip short-lived command, the switch
displays the filters that are currently enabled. For example:
ip short-lived tcp 112
ip short-lived udp 53
ip short-lived udp 123
January 7, 2003
Definition
Enter tcp if the protocol that you want to
filter uses a TCP port.
Enter udp if the protocol that you want
to filter uses a UDP port.
The TCP or UDP port number that the
protocol uses.
Part No. 610-0229-091