Seat Cover Replacement - Acura 3.5 RL Manual

Seat Cover Replacement

CAUTION: Put on gloves to protect your hands.
NOTE: Take care not to tear the seams or damage the
seat covers.
Seat-back cover:
1. Remove the seat-back (see page 20-67).
2. Remove the armrest lid and armrest (see page 20-67).
3. Remove the headrest guides.
HEADREST
GUIDES
4. Remove the center seat belt guide ('98 - 01 models).
HEADREST
GUIDE
KNOB
CENTER SEAT
BELT GUIDE
5. Loosen the seat-back cover by releasing all the
clips, hooks, and inside springs.
CLIPS
HOOKS
INSIDE
SPRINGS
6. Pull back the edge of the seat-back cover all the way
around, release the clips, and remove the seat-back
cover.
SEAT-BACK
COVER
7. Installation is the reverse of the removal procedure.
NOTE:
To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hooks, clips and
inside springs.
Replace the released clips with new ones.
SEAT-BACK
COVER
INSIDE
SPRINGS
CLIPS