Acura 3.5 RL Manual page 610

2nd Gear One-way Clutch
Disassembly/lnspection/Reassembly
1. Separate the countershaft 2nd gear from the park
gear by turning the park gear in the direction
shown.
COUNTERSHAFT
2ND GEAR
2. Remove the one-way clutch by prying it up with the
end of a screwdriver.
COUNTERSHAFT 2ND GEAR
PARK GEAR
SCREWDRIVER
COUNTERSHAFT
2ND GEAR
3. Inspect the parts as follows:
4. After the parts are assembled, hold the countershaft
2nd gear and turn the park gear in the direction
shown to be sure it turns freely. Also make sure the
park gear does not turn in the opposite direction.
COUNTERSHAFT
2ND GEAR
PARK GEAR
Inspect for wear and scoring.
ONE-WAY CLUTCH
Inspect for damage and
faulty movement.
NEEDLE BEARINGS
Inspect for galling and rough
movement.
THRUST NEEDLE
BEARING
Inspect for galling and
rough movement.
THRUST WASHER
Inspect for wear and
scoring.
COUNTERSHAFT
2ND GEAR
Inspect for wear and
scoring.
PARK GEAR