Motor, Drain Tube And Frame Removal - Acura 3.5 RL Manual

Moonroof

Motor, Drain Tube and Frame Removal

CAUTION:
• Put on gloves to protect your hands.
• Be careful not to damage the seats, dashboard, and other interior trim.
1. Remove the headliner (see page 20-45).
2. Disconnect the connectors, detach the harness clip, and remove the ground wire.
NOTE: When removing the motor, disconnect the motor connector, detach the connector from the frame, remove the
bolts and nuts, then remove the motor.
3. Remove the glass (see page 20-34).
4. Disconnect the drain tubes.
5. Remove the frame mounting bolts.
NOTE:
An assistant is helpful when removing the bolts.
Remove the front bolts last.
6. Detach the rear hooks by moving the frame forward, then remove the frame.
Bolt locations
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
MOTOR
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
REAR
HOOK
HOLE
(Body side)
CONNECTOR
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
GROUND
WIRE
MOTOR
FRAME
Nut locations, 3
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
TUBE
CLIP
CONNECTORS
DRAIN
TUBE
HARNESS
CLIP
Remove last.
FRAME
SEAL
Remove
last.