Acura 3.5 RL Manual page 599

Rear Cover/Reverse Idler Gear
Disassembly/lnspection/Reassembly
NOTE:
• Inspect the needle bearings for galling and rough movement.
• Coat all parts with ATF before reassembly.
REAR COVER
DOWEL PIN
REVERSE IDLER GEAR
SHAFT
THRUST WASHER,
14 x 25 mm
8 x 1.25 mm
26 N-m
(2.7 kgf-m, 20 Ibf-ft)
REVERSE IDLER GEAR
SHAFT HOLDER
REVERSE IDLER GEAR
Install in this direction.
THRUST WASHER,
14 x 30 mm