Replacement
Make sure lifts, jacks and safety stands are placed properly (see
1. Raise the front of the vehicle, and support it with safety stands (see
2. Set the parking brake, and block both rear wheels securely.
3. Shift the transmission to the
4. Remove the clamp, then disconnect the transmission range switch connector.
SHIFT CABLE
COVER
LOCK WASHER
Replace.
TRANSMISSION RANGE
SWITCH
5. Remove the clamp from the transmission range switch harness bracket on the rear cover.
6. Remove the shift cable cover mounting bolts.
7. Remove the shift solenoid valve/A/T clutch pressure control solenoid valve harness clamp and connector from the
shift cable cover.
8. Disconnect the shift solenoid valve/A/T clutch pressure control solenoid valve harness connector, then remove the
shift cable cover from the transmission.
9. Remove the control lever.
10. Remove the locknut and lock washer.
11. Remove the transmission range switch.
position.
LOCKNUT
CONTROL LEVER
CONTROL SHAFT
section
1).
section
1).
CLAMPS
LOCKNUT
SPRING
WASHER
SHIFT SOLENOID VALVE/
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE
HARNESS CONNECTOR
TRANSMISSION RANGE
SWITCH CONNECTOR
SHIFT SOLENOID VALVE/
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE
HARNESS CLAMP