Washer Reservoir
Removal
CAUTION: Put on gloves to protect your hands.
'96 - 99 models:
1. Remove the bolt, then pull out the washer filler.
Bolt location, 1
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
HOOK
WASHER
FILLER
CONNECTOR
WINDSHIELD
WASHER MOTOR
2.
Pull away the inner fender as necessary (see page
20-85).
3.
Disconnect the washer tube and windshield washer
motor connector.
4.
Remove the bolt, then remove the washer reservoir
by sliding it forward.
5.
Installation is the reverse of the removal procedure.
NOTE:
Make sure the windshield washer motor connec-
tor and washer tube is connected properly.
Check the windshield washer motor operation.
WASHER
RESERVOIR
HOOK
WASHER
RESERVOIR
WASHER
TUBE
'00-01 models:
1.
Remove the bolt, then pull out the washer filler.
: Bolt location, 1
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
WASHER
FILLER
2.
Pull away the inner fender as necessary (see page
20-85).
3.
Disconnect the washer tube and washer motor con-
nector.
: Bolt locations, 3
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
CONNECTOR
4.
Remove the bolt, then remove the washer reservoir.
5.
Installation is the reverse of the removal procedure.
NOTE:
Make sure the washer motor connector and
washer tube is connected properly.
Check the washer motor operation.
HOOK
WASHER
RESERVOIR
WASHER
WINDSHIELD
TUBE
WASHER MOTOR