Wheel Runout
1.
Raise the vehicle off the ground, and support it with
safety stands in the proper locations (see
2.
Check for bent or deformed wheels.
3.
Attach the dial gauge as shown.
Axial Runout
Standard:
Aluminum Wheel: 0 - 0.7 mm (0 - 0.03 in)
Service Limit:
Radial Runout
Standard:
Aluminum Wheel: 0 - 0.7 mm (0 - 0.03 in)
Service Limit:
4.
Measure the wheel runout by turning the wheel.
5.
If the wheel runout is more than the service limit,
replace the wheel.
section
1).
2.0 mm (0.08 in)
1.5 mm (0.06 in)