Acura 3.5 RL Manual page 567

Transmission
Installation (cont'd)
35. Install the transmission housing mounting bolts.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
6 x 1.0 mm
8.7 Ibf-ft)
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
TRANSMISSION HOUSING
MOUNTING BOLTS
12 x 1.25 mm
64 N-m (6.5 kgf-m, 47 Ibf-ft)
36. Install the ATF dipstick tube bracket bolts.
37. Connect the transmission sub-harness connector.
38. Install the control box.
39. Install the strut brace.
40. Refill the transmission with the recommended ATF
(see page 14-108).
41. Connect the battery positive (+) and negative (-)
cables to the battery terminals.
42. Set the parking brake. Start the engine, and shift the
transmission through all gears three times. Check
the shift lever operation and the A/T gear position
indicator operation.
43. Let the engine reach normal operating temperature
(the radiator fan comes on) with the transmission in
the or position, then turn it off and check ATF
level.
44. Road test as described on pages
45. Enter the anti-theft radio code for the radio, then
enter the customer's radio station presets.
46. Memorize the engine idle speed signal in the PCM
(see page 11-111).
TRANSMISSION
SUB-HARNESS
CONNECTOR
14-104 thru 14-106.