Entry Light Control System
Front Ceiling Light Test
1.
Turn the light switch OFF.
2.
Pry off the lens.
BULBS
(5 W x 3)
LENS
3.
Remove the two screws from the housing.
4.
Disconnect the 4P connector, and remove the hous-
ing.
5.
Check for continuity between the terminals in each
switch position according to the table.
Rear Ceiling Light Test
1.
2.
HOUSING
SCREW
3.
4.
5.
Turn the light switch OFF.
Pry off the lens.
LENS
Remove the two screws from the housing.
Disconnect the 4P connector, and remove the hous-
ing.
Check for continuity between the terminals in each
switch position according to the table.
HOUSING
SCREW
BULBS
(5 W x 3)