Trunk Lid Latch Switch Test
1.
Open the trunk lid, then remove the trunk lid inner
trim (see
section
20).
2.
Disconnect the 6P connector from the trunk lid latch.
3.
Check continuity between the No. 2 and No. 6 termi-
nals.
• There should be continuity with the trunk lid
opened.
• There should be no continuity with the trunk lid
latch in LOCK (trunk lid closed) position.
TRUNK LID LATCH
Terminal side of
male terminals
Trunk Key Cylinder Switch Test
1.
Open the trunk lid, then remove the trunk lid inner
trim (see
section
20).
2.
Disconnect the 2P connector from the trunk key cylin-
der switch.
3.
Check continuity between the No. 1 and No. 2 termi-
nals.
• There should be continuity when the trunk key
cylinder is turned to UNLOCK with the key.
• There should be no continuity when the keylock
is released.
TRUNK KEY
CYLINDER
Terminal side of
male terminals