Acura 3.5 RL Manual page 968

Front Seat
Seat Cover Replacement (cont'd)
Seat cushion cover removal:
1. Remove the seat cushion (see pages 20-58, 20-59).
2. Remove the clips and hooks from under the seat
cushion, then remove the seat cushion cover with
the pad from the seat cushion frame.
HOOKS
PAD
3. Pull back the edge of the seat cushion cover all the
way around, release the clips, and remove the seat
cushion cover.
HOOKS
SEAT CUSHION
CLIPS
FRAME
SEAT CUSHION
CLIP COVER
4. Installation is the reverse of the removal procedure.
NOTE:
To prevent wrinkles when installing a seat cush-
ion cover, make sure the material is stretched
evenly over the pad before securing the clips and
hooks.
Replace the released clips with new ones.
SEAT
COVER
HOOKS
WIRE
(Cover side)
UPHOLSTERY RING PLIERS
(Commercially available)
NEW CLIP
PAD
WIRE (Pad side)