Wheel Sensor Replacement - Acura 3.5 RL Manual

Pulsers/Wheel Sensor
Inspection
Inspection points:
Resistance
Front: 700-1,100
Rear: 1,400-2,000
Open in the wires
Short to body ground in the wires
Short the wire to other one
Installation
Chipped pulser
Air gap: 0.4 - 1.0 mm (0.02 - 0.04 in)
Front
Rear
Remove the rear brake disc to inspect the rear wheel
sensor air grip.

Wheel Sensor Replacement

NOTE:
Be careful when installing the sensors to avoid twist-
ing the wires.
The torque value of the bolts is at 9.8 N-m (1.0 kgf-m,
7 Ibf-ft).
Front
FRONT WHEEL SENSOR
Rear
REAR WHEEL SENSOR