Front Passenger's Door Lock Actuator Test - Acura 3.5 RL Manual

Driver's Door Lock Actuator Test
1. Remove the driver's door panel (see
2. Disconnect the 8P connector from the actuator.
3. Check actuator operation by connecting power and
ground according to the table.
CAUTION: To prevent damage to the actuator,
apply battery voltage only momentarily.
4. Check for continuity between the terminals in each
knob switch position according to the table.
5. If the actuator fails to work properly, replace it.
section 20).
8P
CONNECTOR
Terminal side of
male terminals
Front Passenger's Door Lock
Actuator Test
1. Remove the front passenger's door panel (see
section 20).
2. Disconnect the 8P connector from the actuator.
3. Check actuator operation by connecting power and
ground according to the table.
CAUTION: To prevent damage to the actuator,
apply battery voltage only momentarily.
4. Check for continuity between the terminals in each
knob switch position according to the table.
5. If the actuator fails to work properly, replace it.
Terminal side of
male terminals