Power Mirror Test - Acura 3.5 RL Manual

Power Mirror Test

1. Remove the door panel (see
POWER MIRROR
With memory
Without memory
section 20).
10P [8P]
CONNECTOR
Wire side of
female terminals
Wire side of
female terminals
2. Disconnect the 10P [8P] connector from the power
mirror actuator.
3. Check actuator operation by connecting power and
ground according to the table.
[ ]: Without memory
Defogger Test:
4. Check for continuity between the No. 3 [No. 2] and
No. 4 [No. 3] terminals of the 10P [8P] connector.
There should be continuity.
5. If the mirror fails to work properly, replace the mir-
ror actuator or mirror sub assembly (see page
23-360).
[ ]: Without memory ('98 model)