Dust And Pollen Filters - Acura 3.5 RL Manual

Dust and Pollen Filters

Replacement
1. Remove the glove box (see
2. Remove the glove box back cover (see page 22-65).
3. Remove the filter lid.
4. Turn the ignition switch ON (II), and set the recircu-
lation control switch on RECIRCULATE.
5. Pull the dust and pollen filter assemblies out of the
recirculation housing as shown. Separate the first
filter assembly from the second filter assembly,
then remove the first filter assembly.
DUST AND POLLEN
FILTER ASSEMBLIES
SECOND DUST AND POLLEN FILTER ASSEMBLY
section 20).
FILTER LID
FIRST DUST AND
POLLEN FILTER
ASSEMBLY
6. Remove the second dust and pollen filter assembly
from the recirculation housing as shown.
SECOND DUST AND POLLEN FILTER ASSEMBLY
7. Remove the dust and pollen filter from the filter
housing.
FILTER HOUSING
8. Install in the reverse order of removal. Make sure
that there is no air leakage.
DUST AND POLLEN FILTER