Driving Position Memory
Switch Test
1.
Remove the driver's door panel (see
2.
Disconnect the 10P connector from the memory
switch.
INDICATORS
(LED)
Terminal side of
male terminals
3.
Check for continuity between the terminals in each
switch position according to the table.
Steering Column Switch Test
1.
section
20).
2.
MEMO BUTTON
POSITION
BUTTONS
3.
Remove the steering column covers (see
section
20).
Disconnect the 7P connector from the switch, then
remove the switch from the steering column lower
cover.
STEERING COLUMN SWITCH
Check for continuity between the terminals in each
switch position according to the table.
STEERING COLUMN
LOWER COVER