Disassembly
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS
section before performing repairs or service. Refer to the '99 - 01 Acura 3.5 RL Service Manual, P/N 61SZ305.
CAUTION:
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
8-way power adjustable (with power lumbar support and seat heater):
NOTE:
Take care not to tear the seams or damage the seat covers.
Refer to page
20-8
for the seat harness wiring locations. Route the seat wire harness correctly.
Make sure the bushing and pivot washer are installed correctly.
Apply multipurpose grease to the moving portion of the seat track.
To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.