Acura 3.5 RL Manual page 1106

Combination Light Switch
Replacement
1. Remove the dashboard lower cover (see
2. Remove the steering column covers (see
section 17).
3. Disconnect the 14P connector from the combination
light switch, then remove the two screws and the
switch.
COMBINATION LIGHT SWITCH
4. Install the combination light switch in the reverse
order of removal.
section 20).
14P CONNECTOR
Headlights
Replacement
CAUTION: Headlights become very hot in use; do not
touch them or the attaching hardware immediately
after they have been turned off.
1. Remove the front bumper and front bumper upper
beam (see section
2. Disconnect the connectors.
3. Remove the four mounting bolts, then remove the
headlight assembly.
'96 - 98 models:
HEADLIGHT: 60/55 W
FRONT TURN SIGNAL LIGHT: 21 W
FRONT PARKING LIGHT: 5 W x 2
FRONT FOG LIGHT: 55 W
SIDE MARKER LIGHT: 5 W
'99 - 01 models:
HEADLIGHT LOW BEAM: 35 W
HEADLIGHT HIGH BEAM: 55 W
FRONT TURN SIGNAL/PARKING LIGHT: 27/8 W
SIDE MARKER LIGHT: 5 W
4. Install the headlight in the reverse order of removal.
5. After replacement, adjust the headlights to local
requirements.
20).
HEADLIGHT
ASSEMBLY