Glass, Glass Bracket, And Sunshade Removal - Acura 3.5 RL Manual

Moonroof

Glass, Glass Bracket, and Sunshade Removal

1. Close the glass fully.
2. Slide the sunshade all the way back.
3. Remove both bracket covers.
BRACKET COVER
Forward
4. Remove the nuts from both glass brackets.
GLASS BRACKET
6 x 1.0 mm
9 N-m (0.9 kgf-m, 7 Ibf-ft)
5. Remove the glass by lifting up and pulling forward
as shown.
NOTE: Do not damage the roof panel.
SCREW
PLUG
GLASS
6. Remove the drain channel.
DRAIN CHANNEL
SCREW
7. Remove the holder cover, then remove the rail
holder B.
COVER
RAIL HOLDER B
GUIDE PIN
8. Using the moonroof wrench, move the glass bracket
to the position where the moonroof normally pivots
down, and remove the screws.
GLASS BRACKET
SCREW
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
SCREWS