Trunk Lid - Acura 3.5 RL Manual

Trunk Lid

Adjustment
NOTE: Before adjusting the trunk lid, loosen each bolt slightly.
1. Adjust the trunk lid hinges right and left, as well as fore and aft, by using the elongated holes.
2. Turn the trunk lid edge cushions, as necessary, to make the trunk lid fit flush with the body at the rear and side edges.
3. Adjust the fit between the trunk lid and the trunk lid opening by moving the striker.
4. After adjustment, tighten each bolt securely.
TRUNK LID
HINGE
6 x 1.0 mm
9.8 N-m (1.0 kgf-m. 7.2 Ibf-ft)
NOTE: Remove the rear shelf (see page 20-43).
NOTE: Move the striker right or left until it's centered in
the trunk lid latch as shown.
TRUNK LID
LATCH
TRUNK LID
NOTE: Take care not
to hit the rear window
when loosening the
bolts.
STRIKER
TRUNK LID EDGE
CUSHION
TRUNK LID
TRUNK LID
EDGE CUSHION
NOTE: When adjusting the striker, remove the rear trim
panel (see page 20-44), then remove the striker cover.
TRUNK LID
HINGE
STRIKER
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
STRIKER
STRIKER
COVER