Acura 3.5 RL Manual page 807

Parking Brake
Parking Brake Shoes Replacement (cont'd)
12. Apply Molykote 44 MA grease on each sliding sur-
face.
CAUTION: Contaminated brake linings or drums
reduce stopping ability. Keep grease or oil off the
brake linings. Wipe any excess grease off the parts.
BACKING PLATE
Greasing symbols:
Brake shoe ends
Opposite the edge of the shoe
Sliding surface
13. Clean the threaded portions of clevises A and B.
Coat the threads of the clevises with Molykote 44 MA
grease. To shorten the clevises, turn the adjuster bolt.
LOWER RETURN SPRING
CLEVIS B
14. Install the adjuster assembly, and the lower return
spring on the parking brake shoes.
PIVOT PIN
ADJUSTER ASSEMBLY
CLEVIS A
Apply Molykote 44 MA grease
to sliding surface.
15. Connect the rod spring to the connecting rod and
parking brake shoe as shown.
NOTE: Hook the rod spring to the connecting rod
with the spring end pointing downward.
16. Install the tension pins and retainer springs.
TENSION PINS
ROD SPRING
SPRING END
CONNECTING ROD
RETAINER SPRING
Install securely on
tension pin.