Acura 3.5 RL Manual page 962

Front Seat
Disassembly
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
NOTE: Take care not to scratch the seat covers and body.
8-way power adjustable (with seat heater):
NOTE: Refer to page 20-65
PIVOT NUT
8 x 1.25 mm
22 N-m (2.2 kgf-m,
16 Ibf-ft)
SEAT CUSHION
CLIP
To seat cushion
cover.
SEAT HEATER
CONNECTOR
CENTER
COVER
10 x 1.25 mm
47 N-m (4.8 kgf-m,
35 Ibf-ft)
SEAT LINKAGE
Disassembly, page
20-63
Installation is the reverse of the removal procedure.
NOTE:
Make sure the bushing and pivot washer are installed properly.
To prevent wrinkles when installing the seat-back cover, make sure the material is stretched evenly over the pad.
Grease the sliding portion.
for the seat wire harness installation.
SEAT-BACK
PIVOT
WASHER
SEAT-BACK
HEATER
CONNECTOR
BUSHING
HEADREST
HOOKS
HOOK
SIDE AIRBAG
CONNECTOR
('99 - 01 models)
10 x 1.25 mm
47 N-m (4.8 kgf-m, 35 Ibf-ft)
RECLINE ADJUSTER
COVER
POWER SEAT
SWITCH
KNOBS
CAP
BACK COVER
CLIPS
RECLINE
COVER
CLIP
To seat cushion
cover.