Climate Control Unit; Bulb Replacement - Acura 3.5 RL Manual

Climate Control Unit

Replacement
1. Remove the center air vent and center console trim
(see section 20).
2. Remove the bolts and the climate control unit
together with audio unit, then disconnect the con-
nectors.
CLIMATE CONTROL UNIT
3. Remove the bolts, the screws and the brackets, then
remove the screws and the climate control unit
from the audio unit.
CLIMATE CONTROL UNIT
4. Install in the reverse order of removal.
BRACKET
AUDIO UNIT
BRACKET

Bulb Replacement

CAUTION:
Before replacing bulbs, discharge the static electrici-
ty (which accumulated on you when you removed
the climate control unit) by touching the door striker
or other body parts.
Do not touch the electronic components on the
printed circuit board in the climate control unit.
1. Remove the climate control unit (see previous column).
2. Carefully remove the self-tapping screws and the
rear cover.
REAR COVER
3. Remove the bulb(s) with a flat-tip screwdriver.
4. Install in the reverse order of removal. Make note of
the following items.
NOTE:
• Do not kink or pull on the wires between the con-
trol unit and printed circuit board.
• After installation, operate the climate control unit
to see whether it works properly.
• Run the self-diagnosis function to confirm that
there are no problems in the system.
BULB