Acura 3.5 RL Manual page 973

Front Seat
Seat Linkage Disassembly (cont'd)
4-way power adjustable:
NOTE: To remove the slide motor and slide gearbox, slide the front seat backward fully.
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
6 x 1.0 mm
8 N-m (0.8 kgf-m
6 Ibf-ft)
Apply liquid
thread lock.
SLIDE
GEARBOX
Installation is the reverse of the removal procedure.
NOTE:
Before installing the slide motor and slide gearbox, align portion
Grease the slide lead screws and gear portion of the recline motor.
Check the slide motor, slide gearbox, and recline motor operations.
5 x 0.8 mm
3 N-m (0.3 kgf-m,
21 Ibf-ft)
RECLINE
ADJUSTER
SLIDE JOINT
CABLE
3.7 N-m (0.38 kgf-m,
2.7 Ibf-ft)
Apply liquid thread
lock.
OUTER SLIDE
ADJUSTER
6 x 1.0 mm
8 N-m (0.8 kgf-m,
6 Ibf-ft)
Apply liquid thread lock.
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
Apply liquid
thread lock.
SLIDE
MOTOR
as shown.
RECLINE
MOTOR
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
Apply liquid thread lock.
PIVOT
BRACKET
SEAT BELT
BUCKLE
BRACKET
INNER SLIDE
ADJUSTER
10 x 1.25 mm
25 N-m (2.5 kgf-m,
18 Ibf-ft)