Sash Trim Removal; Inner Sash Trim Removal - Acura 3.5 RL Manual

Doors

Sash Trim Removal

NOTE: Lower the glass fully.
1. Remove:
Door panel (see page 20-4)
Inner sash trim
2. Remove the glass run channel and outer weather-
strip as needed. Remove and loosen the screws,
then remove the sash trim.
Screw locations
INNER SASH
TRIM
GLASS RUN
CHANNEL
GROMMET
GLASS RUN
CHANNEL
3. Installation is the reverse of the removal procedure.
NOTE: Make sure the glass run channel and outer
weatherstrip are installed securely.

Inner Sash Trim Removal

NOTE:
OUTER
WEATHERSTRIP
SASH TRIM
SASH
TRIM
Installation is the reverse of the removal procedure.
Loosen.
Lower the glass fully.
Take care not to scratch the inner sash trim.
Remove the door panel (see page 20-4).
Clip locations
GLASS
RUN
CHANNEL
INNER
SASH TRIM
INNER SASH
TRIM
NOTE: If necessary, replace any damaged clips.
INNER
WEATHERSTRIP
CLIP