ATP Pump Body
Disassembly/Inspection/Reassembly
NOTE:
Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air.
Blow out all passages.
Replace the valve body as an assembly if any parts are worn or damaged.
Check all valves for free movement. If any fail to slide freely, see Valve Body Repair on page 14-136.
Coat all parts with ATP during assembly.
Install the filter in the direction shown.
VALVE CAP
ROLLER
LOCK-UP CONTROL VALVE
SPRING SPECIFICATIONS
LOCK-UP TIMING
VALVE
SLEEVE
FILTER
Replace.
RELIEF VALVE
SPRING SEAT
ATP PUMP BODY
Inspect for wear, scratches,
and scoring.
TORQUE CONVERTER
CHECK VALVE
Unit: mm (in)