Security Alarm System
Indicator Replacement
1. Remove the door panel (see
2.
Remove the two screws from the indicator.
INDICATOR
3.
Disconnect the 2P connector, and remove the
indicator from the door panel.
section
20).
DOOR PANEL
SCREWS
Hood Switch Test
1. Open the hood.
2. Disconnect the 2P connector from the hood switch.
3.
Check for continuity between the No. 1 and No. 2
terminals.
• There should be continuity with the lever released
(hood opened).
• There should be no continuity with the lever
pushed down (hood closed).
Terminal side of
male terminals