Inspection
NOTE:
• Inspect and adjust the 43 x 74 mm thrust washer when
disassembling the mainshaft assembly or replacing
mainshaft 3rd gear and/or 1st/4th clutch assembly.
• Lubricate all parts with ATF during assembly.
1.
Install mainshaft 3rd gear on the mainshaft using
the special tool and a press as shown.
PRESS
COLLAR
MAINSHAFT
3RD GEAR
ATTACHMENT,
45 x 55 mm 1.0.
07MAD - PR90100
3RD GEAR
ATTACHMENT,
45 x 55 mm I.D.
07MAD - PR90100
(cont'd)