Acura 3.5 RL Manual page 940

Moonroof
Switch Plate Adjustment (Fully Closed Position/Auto Stop Position) (cont'd)
5. Using the moonroof wrench, open the glass to the auto stop position as shown.
6. Using an open-end wrench, loosen the switch plate B mounting bolts.
7. Adjust position of switch plate B (switch cam) as shown.
NOTE:
Move switch plate B a little at a time, then secure switch plate B at the position where the switch cam contacts the
auto stop position switch (a faint click is heard).
Check that switch plate B contacts the cable bracket.
INNER CABLE END
SWITCH
PLATE B
AUTO
STOP
POSITION
SWITCH
CABLE BRACKET
8. Check the operation of the glass (from the tilt-up position to the fully closed position, from the fully opened position
to the auto stop position, from the auto stop position to the fully closed position) by operating the moonroof switch.
SWITCH CAM
Forward
CABLE BRACKET
OPEN-END
WRENCH
CABLE
BRACKET
130 mm
(5.1 in.)
SWITCH PLATE B
BOLTS
GLASS