Driving Position Memory System (DPMS)
Tilt/Extend-retract Motor Test
1.
Remove the steering column covers (see
section
20).
2.
Disconnect the connector from each motor.
EXTEND-
RETRACT
MOTOR
EXTEND-RETRACT MOTOR
2P CONNECTOR
3.
Test the motors according to the table:
Tilt Motor:
Extend-retract Motor:
CAUTION: When a motor stops running, disconnect
battery power immediately.
TILT
MOTOR
Terminal side of
male terminals
TILT MOTOR
3P CONNECTOR
Tilt/Extend-retract Position Sensor
Test
1.
Remove the steering column covers (see
section
20).
2.
Disconnect the 4P connector from the sensor.
Terminal side of
male terminals
3.
Measure resistance between the terminals in each
position according to the table.
Position
EXTEND-
RETRACT
POSITION
SENSOR
4P CONNECTOR
TILT
POSITION
SENSOR
Terminal
Resistance