9. Remove the rail holder A.
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft
GLASS BRACKET
DRAIN CHANNEL
ROD
DRAIN CHANNEL ROD STOP
Rotate as shown to remove it from the guide rail.
10. Remove the drain channel rod slider by moving the
cable slider forward using the moonroof wrench.
11. Detach the drain channel rod stop from the cutout
of the guide rail as shown.
RAIL HOLDER A
DRAIN CHANNEL
ROD SLIDER
GUIDE
RAIL
12. Slide the sunshade forward, then remove it.
SUNSHADE
13. Installation is the reverse of the removal procedure.
NOTE: Check the glass height (see page 20-33).
14. Check for water leaks.
NOTE: Do not use high-pressure water.