Vehicle Speed Sensor (Vss) Replacement - Acura 3.5 RL Manual

Gauge Assembly
Replacement
1. Remove the instrument panel (see
2. Remove the screws from the gauge assembly, and
spread a protective cloth on the upper column cover.
CONNECTORS
GAUGE
ASSEMBLY
3. Disconnect the connectors, and remove the gauge
assembly.
4. Install in the reverse order of removal.
section 20).
SCREW
Vehicle Speed Sensor
(VSS)
Replacement
1. Disconnect the 3P connector from the vehicle speed
sensor (VSS).
NOTE: The VSS drive link is a very small part; be
careful not to lose it.
MOUNTING
MOUNTING
BOLT
BOLT
2. Remove the two mounting bolts, then remove the
VSS.
3. Install in the reverse order of removal.
DRIVE LINK
VSS
3P CONNECTOR