Passenger's Window Switch Test; Passenger's Window Motor Test - Acura 3.5 RL Manual

Passenger's Window Switch Test

1. Remove the passenger's window switch (see
section 20).
'98 - 01 models
2. Check for continuity between the terminals in each
switch position according to the table.
[ ]: '98-01 models
3. Check for continuity between the No. 4 and No. 6
terminals. ('98-01 models)
There should be continuity.
If there is no continuity, check the indicator light
bulb.
'96 - 97 models:
PASSENGER'S
WINDOW SWITCH

Passenger's Window Motor Test

1. Remove the passenger's door panel (see
2. Disconnect the 2P connector from the window motor.
Terminal side of
male terminals
3. Check window motor operation by connecting power
and ground according to the table.
CAUTION: When the motor stops running, discon-
nect one lead immediately.
4. If the motor does not run or fails to run smoothly,
replace it.
section 20).