Courtesy Light Replacement
NOTE: The bulb or lens alone can be replaced without re-
moving the door panel.
1.
Remove the door panel (see
2.
Remove the two screws and retainer plate from be-
hind the door panel.
RETAINER PLATE
DOOR PANEL
BULB (3.4 W)
3.
Replace the courtesy light.
section
20).
HOUSING
LENS
Ignition Key Switch Test
1.
Remove the dashboard lower cover (see
2.
Disconnect the 8P connector from the main wire
harness.
8P CONNECTOR
Wire side of
female terminals
3.
Check continuity between the No. 2 and No. 7 termi-
nals.
• There should be continuity with the ignition key
inserted.
• There should be no continuity when the ignition
key is removed.
section
20).