License Plate Light
Replacement
'96 - 98 models:
1.
Remove the two screws from the license plate light
assembly.
2.
Pull the light out, and disconnect the 2P connector
from the light.
2P CONNECTOR
LENS
3.
Take the lens off, then replace the bulb.
BULB (3CP)
'99 - 01 models:
1. Slide and pull out the license plate light.
2. Disconnect the 2P connector from the light.
2P CONNECTOR
BULB (5W)
LENS
3. Take the lens off, then replace the bulb.