Acura 3.5 RL Manual page 549

Disassembly/Reassembly
NOTE:
• Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
• Blow out all passages.
• Do not let the check balls fall out of the main valve body when removing the main valve body.
• Coat all parts with ATP before reassembly.
• Replace the O-rings and filters.
• Install the filters in the direction shown.
• Refer to page 14-141 when installing the check balls on the main valve body.
CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.