Master Cylinder Inspection - Acura 3.5 RL Manual

Master Cylinder Inspection

CAUTION:
• Do not spill brake fluid on the vehicle; it may damage
the paint; if brake fluid does contact the paint, wash
it off immediately with water.
• Before reassembling, check that all parts are free of
dust and other foreign particles.
• Do not try to disassemble the master cylinder assem-
bly. Replace the master cylinder assembly with a
new one if necessary.
• Make sure no dirt or other foreign matter is allowed
to contaminate the brake fluid.
NOTE: '96 - 97 models shown.
RESERVOIR SEAL
Check for damage and
deterioration.
STRAINER
Remove accumulated
sediment.
MASTER CYLINDER
Check for leaks, rust, and damage.
RESERVOIR CAP
Check for blockage
and vent holes.
ROD SEAL
Check for damage
and deterioration.
SILICONE GREASE