Turn Signal/Hazard Relay Input Test - Acura 3.5 RL Manual

Turn Signal/Hazard Flasher System

Turn Signal/Hazard Relay Input Test

1. Remove the driver's side kick panel, then remove
the turn signal/hazard relay from the under-dash
fuse/relay box.
2. Inspect the relay and socket terminals to be sure
they are all making good contact.
• If the terminals are bent, loose or corroded, repair
them as necessary, and recheck the system.
• If the terminals look OK, make the following
input tests at the socket.
If any test indicates a problem, find and
correct the cause, then recheck the system.
If all the input tests prove OK, the turn signal/
hazard relay must be faulty; replace it.
Cavity Test condition
*1: '96 -98 models
*2: '99-01 models
Test: Desired result
UNDER-DASH
FUSE/RELAY BOX
Possible cause if result is not obtained
TURN SIGNAL/
HAZARD RELAY