Acura 3.5 RL Manual page 1060

6. Remove the bolts and the upper mount brackets
from the condenser as shown.
7. Remove the condenser by lifting it up as shown.
NOTE: Be careful not to damage the radiator and
the condenser fins when removing the condenser.
UPPER MOUNT BRACKETS
CONDENSER
8. Install in the reverse order of removal. Make note of
the following items.
If you're installing a new condenser, add refriger-
ant oil (ND-OIL 8) (see page 22-73).
Replace the O-rings with new ones at each fit-
ting, and apply a thin coat of refrigerant oil
before installing them.
NOTE: Be sure to use the right O-rings for HFC -
134a (R - 134a) to avoid leakage.
Be careful not to damage the radiator and the
condenser fins when installing the condenser.
Be sure to install the lower mount cushions of
condenser securely into the holes.
Charge the system (see page 22-89), and test its
performance (see page 22-76).