Rear Door Lock Actuator Test - Acura 3.5 RL Manual

Power Door Locks

Rear Door Lock Actuator Test

1. Remove the rear door panel (see
2. Disconnect the 6P connector from the actuator.
6P CONNECTOR
Terminal side of
male terminals
3. Check actuator operation by connecting power and
ground according to the table.
CAUTION: To prevent damage to the actuator,
apply battery voltage only momentarily.
section 20). 4. Check for continuity between the terminals in each
knob switch position according to the table.
5. If the actuator fails to work properly, replace it.