Audio Unit Removal - Acura 3.5 RL Manual

Stereo Sound System

Audio Unit Removal

SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS (section 24) before performing repairs or
service.
With navigation system:
1. Make sure you have the anti-theft code for the radio
and the navigation system, then write down the fre-
quencies for the radio's preset buttons.
2. Remove the navigation panel and audio panel
assembly (see section
3. Remove the four mounting screws, then remove the
navigation monitor.
4. Loosen the audio unit mounting screws.
5. Remove the pins from the bracket, then remove the
navigation panel.
20).
6. Remove the four screws, then remove the audio unit.
AUDIO UNIT
7. Install in the reverse order of removal.
8. After installing the audio unit, enter the anti-theft
code for the radio and the navigation system, then
enter the customer's radio station presets.
SCREWS